Create a playful Christmas card featuring two layered cats, a decorated tree, presents, and a Champagne-foiled greeting on black cardstock. This detailed photo tutorial explains how to assemble the cats’ eyes, add the tiny accessories, build the tree, and position the scene with a mixture of flat and dimensional adhesive.
Hello crafters! It’s Lisa Tilson here, sharing a card with Yana Smakula’s Christmas Cats Collection. One cat is behaving particularly badly by jumping onto the tree! The scene uses Christmas Cats, Christmas Cats Accessories, and Meowy Christmas Sentiments. Follow the stages below to keep the small pieces organized as you work.
Project Snapshot
| Project type | Handmade cat Christmas card |
|---|---|
| Finished size | A2 portrait: 4.25” x 5.5” |
| Techniques | Layered die cutting, small-piece assembly, hot foiling, stacked sentiments, and scene building |
| Occasion | Christmas |
| Featured products | Christmas Cats, Christmas Cats Accessories, and Meowy Christmas Sentiments by Yana Smakula |
| Experience recommended | Basic die cutting, careful small-piece assembly, and familiarity with hot foiling |
What You’ll Need
Spellbinders Supplies
- Christmas Cats Etched Dies by Yana Smakula
- Christmas Cats Accessories Etched Dies by Yana Smakula
- Meowy Christmas Sentiments Press + Foil Plates & Die Set by Yana Smakula
- ColorWheel cardstock in Truffle, Anchor, Fawn, Fog, Raven, Peridot, Seaside, Poppy, Rainforest, Pomegranate, Acorn, and Waterfall
- Gold Assortment Treasured Cardstock - brushed metallic finish
- Glimmer Hot Foil Roll - Champagne
- Original Glimmer Hot Foil System
- Platinum SIX Die Cutting Machine with Universal Plate System
- Best Ever Craft Tape
- Craft Stax Medium Tray Set
- Black Foam Adhesive Squares Mix - 1MM
- Red Color Essentials Gems
Other Supplies
- Neenah Classic Crest Solar White cardstock, 80 lb and 110 lb
- Bearly Art Mini Precision Craft Glue
- Tweezers, scissors, a paper trimmer, and a scoring tool
Spellbinders Supplies:
Set Up for Die Cutting
For the die-cutting stages, use the Platinum SIX Universal Plate System in this order, from bottom to top:
- Plate A - Platform Base
- Plate B - Platform Top
- Plate C - Cutting Plate
- Cardstock with the die on top, cutting edge facing down
- Plate C - Cutting Plate
Photo Note: Some dies are shown cutting edge up so you can identify the shapes. Flip them over before cutting so the cutting edge touches the cardstock.
How to Make the Christmas Cats Card
Step 1 - Die Cut the Cats and Facial Details
Prepare the Christmas Cats pieces using the following color combinations:
| Pieces | Cardstock |
|---|---|
| Solid cat bases | Truffle and Anchor |
| Cat outline layers | Fawn and Fog |
| Eye pieces | Raven, Peridot, and Seaside |
| Scarf and tiny tongue | Poppy |
Flip the dies cutting side down, tape them in position, and run them through the machine.
Lisa’s Small-Piece Tip: The scarf die also cuts the cat’s tiny tongue. Keep it in a tray as soon as you remove the die cuts. You can omit it, but it adds an extra playful detail to the expression.
Step 2 - Die Cut the Tree, Gifts, and Accessories
Use Christmas Cats Accessories to prepare the pieces below.
| Pieces | Cardstock |
|---|---|
| Tree | Rainforest |
| Pot layers | Poppy and Pomegranate |
| Tree trunk | Acorn |
| Star, garlands, and bauble bases | Brushed metallic cardstock from Gold Assortment Treasured Cardstock |
| Present bases | Waterfall and Peridot |
| Present ribbons, bows, and hat trims | 80 lb white cardstock |
| Hats | Pomegranate |
| Colored bauble layers | Poppy, Seaside, and Peridot |
Cut the pot die from both red shades. Cut the tree decorations, trunk, presents, and white ribbons, then prepare the hats and baubles.
Cut the bauble base die twice from brushed gold cardstock and the colored bauble die once from each of Poppy, Seaside, and Peridot. Keep all the small pieces in a Medium Craft Stax Tray.
Step 3 - Assemble the Cats and Match the Eye Pieces
Glue the lighter outline cat layers onto their darker solid bases.
Attach the small Seaside eye piece to its matching black base.
Add small dabs of glue behind the grey cat’s face. Place the assembled eye piece colored side down against the back of the face so the blue irises show through from the front.
Assemble the green eye pieces on their respective black bases. Test their placement before gluing: only one of these eye shapes fits the brown cat used here.
Glue the matching green eye assembly behind the brown cat’s face, again placing the colored side against the back of the face.
For another visual reference, use the official Christmas Cats assembly guide.
Step 4 - Add the Scarf, Tongue, and Santa Hat
Dress the brown cat by attaching the scarf section around the neck first, followed by the bow and ribbon tails.
Add a tiny dab of glue at the mouth and attach the small tongue piece.
Attach the white bobble and trim to the red hat.
Glue the completed hat onto the grey cat’s head.
Step 5 - Assemble and Decorate the Christmas Tree
Attach the Pomegranate pot rim to the Poppy pot base.
Add glue to the bottom of the Acorn trunk and attach the pot. Use the guidelines on the trunk to position the pot and tree.
Attach the Rainforest tree to the upper section of the trunk.
Apply glue to the straight attachment section of the gold star and secure it behind the top of the tree.
Add the three gold garlands with liquid glue.
Step 6 - Finish the Baubles and Presents
Glue the colored bauble layers onto their gold bases.
Lisa’s Bauble Alignment Tip: The colored pieces are not completely circular. Position the straight edge at 12 o’clock, with the small decorative cuts toward the bottom right.
Attach seven baubles to the tree.
Add the white ribbon pieces to the presents, using the placement guidelines.
Attach the bows. On the green present, the bow tilts left; on the blue present, it tilts right.
Step 7 - Prepare the Sentiment for Hot Foiling
Choose the “Have A Pawsome Christmas” plate from Meowy Christmas Sentiments. On your work surface, place Champagne Glimmer Hot Foil over Raven cardstock with the shiny side facing up.
Place the sentiment plate on top with its raised design against the shiny foil. Secure the arrangement with Best Ever Craft Tape.
Switch on the Original Glimmer Hot Foil System and wait for the green Platform Ready light.
Turn the taped cardstock, foil, and plate arrangement over onto the heated platform. The plate should contact the platform directly. Press the timer button.
Add the Thin Shim and Spacer Plate. Wait for the timer button to stop flashing, then remove the platform from the docking station.
Step 8 - Transfer the Foil and Reveal the Greeting
Run the prepared Glimmer platform through the die-cutting machine using the foiling setup for your equipment.
Remove the foil to reveal the Champagne greeting on Raven cardstock.
For more guidance, see our beginner’s guide to Glimmer hot foil stamping.
Step 9 - Die Cut and Stack the Sentiment
Tape the coordinating die around the foiled greeting and cut it out. Use the same die to cut two additional layers from Raven cardstock.
Glue the three layers together, placing the foiled greeting on top.
Step 10 - Arrange the Tree, Cats, and Gifts
Temporarily position the greeting on an A2 Raven panel measuring 4.25” x 5.5”. Use it as a guide while gluing the tree above it.
Glue the sentiment in place.
Attach the green present.
Add Black Foam Adhesive Squares to the backs of both cats and the blue present, following the placement shown.
Remove the release liners and attach the grey cat. Add the blue present to the left of the pot, then place the brown cat to the right.
Step 11 - Mount the Panel and Add the Final Gem
Create a white A2 card base from cardstock measuring 11” x 4.25”, scored and folded at 5.5”. Glue the completed Raven panel onto the base.
Add a Red Color Essentials Gem to the scarf where the bow and ribbon tails meet.
Tips for Layered Cat Christmas Cards
- Save the tiny tongue immediately. It is cut with the scarf die and is easy to lose among the other pieces.
- Test the eye shapes before gluing. Each cat needs its matching eye assembly, placed colored side against the back of the face.
- Use the placement guides. The tree trunk and present pieces include details to help align the layers.
- Check bauble orientation. Place the straight edge at the top, with the decorative cuts toward the bottom right.
- Plan the greeting first. Temporarily positioning it gives you a reference for the tree and remaining scene elements.
- Vary the dimension. Lisa glued the tree and green present flat, stacked the greeting, and raised the cats and blue gift with foam squares.
Ways to Customize Your Christmas Cats Scene
Change the cardstock colors to resemble your own cats, then choose coordinating scarves, hats, and presents. Try another greeting from Meowy Christmas Sentiments or a different foil color on the dark background.
For another scene, explore Christmas Cats Window View, which includes window and interior details. You could also try texture from the A2 Ornate Molded Frame or A2 Herringbone Decor embossing folders.
For a simpler variation, use one cat and fewer tree decorations while keeping the same A2 layout.
Frequently Asked Questions
How do you assemble the eyes for the Christmas Cats dies?
Layer the colored iris piece onto its matching black backing, then attach the assembly behind the cat’s face. The colored side faces the back of the face so the irises show through the openings. Test the fit first, since the different cats use different eye shapes.
Where does the tiny tongue piece come from?
The tongue is cut as part of the scarf die. It is very small, so place it in a tray when separating the die cuts. Lisa attached it with a tiny dab of glue at the brown cat’s mouth. You can omit it if you prefer.
Which way should the bauble layers face?
The colored bauble pieces have a straight edge that belongs at the top, or 12 o’clock, when attaching them to the gold bases. The small decorative cuts should sit toward the bottom right. Check this orientation before adding the baubles to the tree.
How is the foiled sentiment made dimensional?
Lisa cut the foiled greeting with its coordinating die, then cut two additional copies from Raven cardstock. Gluing all three layers together creates a raised sentiment with the foiled layer on top. The assembled greeting is attached to the panel with liquid glue.
More Cat Christmas Card and Foiling Ideas
- Explore the inspiration and products in Yana’s Christmas Cats collection introduction.
- Try a different scene with this Christmas Cats shaker card tutorial.
- Learn more about the technique in our beginner’s guide to hot foil stamping.
This card brings together expressive cats, a decorated tree, and a foiled greeting against a simple dark background. Work through the small assemblies first, then arrange the finished pieces around the sentiment. Changing the cat colors and accessories gives you plenty of ways to make the scene your own, whether your Christmas tree visitors are well behaved or a little more adventurous!
About the Designer
Lisa Tilson created this Christmas Cats card and shares the die-cut assembly, foiling, and scene-building process in the accompanying photographs. Find more of her projects on My Card Trip, Instagram, Facebook, and YouTube.

2 comments
Lisa ~ All I can say is WOW!! What a FANTASTIC tutorial … you left no step out, no matter the size!! Thank YOU for the inspiration!! The tutorials on Spellbinders are AWESOME (and I know a lot of work). Yana’s cat collection was no brainer, but I am convinced that I need the Glimmer Hot Foil System!
Lisa ~ All I can say is WOW!! What a FANTASTIC tutorial … you left no step out, no matter the size!! Thank YOU for the inspiration!! The tutorials on Spellbinders are AWESOME (and I know a lot of work). Yana’s cat collection was no brainer, but I am convinced that I need the Glimmer Hot Foil System!