Hot Foil Joy to the World Christmas Card Tutorial with Upright Italic Press & Foil Plate
on July 19, 2026

How to Make a Hot-Foiled Christmas Card with Stripes and Layered Arches

Create a hot-foiled Christmas card with a gold greeting, colorful paper stripes, and a layered arch frame. This photo tutorial takes you through foiling the sentiment, cutting the arch layers, arranging a pink-to-red-to-green background, and finishing with a two-tone bow and clear crystals.

If you want to combine hot foiling with die-cutting, this project shows how the techniques work together in one A2 card. The striped background also leaves you with extra die-cuts for additional cards, making the design useful when planning several holiday greetings.

Hi, crafty friends! Lea Lawson here. I’m using the Upright Italic Joy to the World Press + Foil Plate by Paul Antonio for the greeting. I love how the calligraphy pairs with the bright stripes and glittered frame!

Joy to the World Christmas card with gold foiling, colorful stripes, a glitter arch, and a red bow

Project Snapshot

Project Type Handmade Christmas card
Techniques Hot foiling, die-cutting, paper strip backgrounds, and dimensional layering
Occasion Christmas
Finished Size A2: 4¼″ × 5½″
Color Palette Pink, red, green, white, and gold
Featured Product Upright Italic Joy to the World Press + Foil Plate by Paul Antonio

What You’ll Need

Spellbinders Supplies

Other Supplies

  • Liquid glue
  • Foam tape
  • Cardstock shim, if appropriate for your foiling setup
  • Tools for trimming strips and preparing an A2 card base

How to Make the Hot-Foiled Christmas Card

Prepare the foiled arch first, then build the striped background and add the finishing details. Keep the extra paper strips for additional holiday cards.

Step 1 - Heat the Foiling Platform and Sentiment Plate

Turn on the Original Glimmer Hot Foil System and allow it to heat. When the green ready light appears, place the Joy to the World plate on the platform and press the timer button.

When the timer stops flashing, prepare the white cardstock and Polished Brass hot foil.

Preparing the Glimmer Hot Foil System

Heating the Joy to the World sentiment plate

Preparing foil and white cardstock for the greeting

Step 2 - Foil the Greeting onto White Cardstock

Remove the platform from its base. Place the foil over the heated plate with its shiny colored side facing down toward the plate, then place white cardstock on top. Add the foiling plates in the order recommended for your system.

Run the prepared platform through the Platinum SIX.

Lea’s Tip: I like adding a cardstock shim within my Glimmer sandwich when foiling press plates. This is a preference for my setup; check your system’s instructions and test the combination that works with your machine.

Layering foil over the heated sentiment plate

Adding cardstock to the foiling stack

After the pass through the machine, gently peel away the foil carrier to reveal the greeting.

Passing the prepared foiling platform through the machine

Removing the foil carrier after foiling

Revealing the foiled Joy to the World greeting

Step 3 - Cut the White Arch Frame and Sentiment Panel

Cut around the foiled greeting with Arch #4 from the Essential Arches Etched Dies.

Positioning an arch die around the foiled sentiment

Cut around the greeting again with the smaller Arch #6 from the same set. This second cut separates the smaller sentiment arch from the larger white frame. Keep both pieces for assembly.

Step 4 - Make the Gold Glitter Accent Frame

Cut the second die from the Color Block Accent Arches Etched Dies using gold glitter cardstock.

Cutting the accent arch from gold glitter cardstock

Preparing the gold glitter arch accent

Gold glitter arch pieces ready for layering

Arranging the glitter accent with the white arch frame

Adhere the glitter accent to the larger white arch frame.

Adding adhesive to the arch layers

Layered white and gold glitter arch frame

Step 5 - Raise the Sentiment Arch

Add foam tape to the back of the smaller foiled sentiment arch. Adhere it in the center of the larger frame.

Adding foam tape to the back of the sentiment arch

Foiled sentiment raised inside the glittered arch frame

Step 6 - Die-Cut the Colored Strips

Use the Stripe Right Etched Dies to cut strips from the following cardstock colors:

Die-cutting strips from the holiday cardstock colors

Pink, red, and green cardstock strips ready for the background

Step 7 - Assemble the Striped Background

Gather the strips for this card and adhere them across the lower portion of a white A2 card base. Arrange the colors in a gradient, moving through pinks, reds, and then greens.

Lea’s Tip: You’ll have plenty of strips left over. Keep them for additional holiday cards and try changing the greeting for each one.

Colored strips arranged across the white card base

Trim the overhanging strips flush with both sides of the card base.

Trimming the paper strips to the card edges

Step 8 - Attach the Arch and Assemble the Bow

Adhere the completed sentiment arch to the card front with liquid glue.

Attaching the layered sentiment arch to the striped background

Cut the bow pieces from the Bow & Bell Scallop Frame Etched Dies using Poppy and Pomegranate cardstock. Assemble the bow.

Preparing the two-tone red bow pieces

Assembled red bow added to the upper-right corner of the arch

Step 9 - Add the Finishing Crystals

Attach the bow to the upper-right corner of the sentiment arch. Finish with clear self-adhesive crystals from the Silver Mix Color Essentials Gems.

Completed striped Christmas card accented with a red bow and clear crystals

Tips for the Best Results

  • Foil before cutting the arch. This lets you position the arch die around the finished greeting.
  • Keep both white arch pieces. The larger frame supports the glitter accent, while the smaller piece holds the foiled sentiment.
  • Treat shimming as setup-specific. Lea uses a cardstock shim in her foiling sandwich; test against your system’s recommended setup.
  • Trim the stripes after adhering them. The strips can extend beyond the base while you arrange them, then be trimmed to the card edges.
  • Save the extra strips. Cutting several colors produces pieces for more than one holiday card.

Ways to Customize This Project

Use the same striped layout with another holiday greeting, or try a different group of cardstock colors. Changing the foil and glitter accent together offers another way to vary the finish.

For a batch of cards, prepare several striped bases from the leftover die-cuts, then add different sentiments. You could also explore a simpler version without the bow or crystals. These are suggested variations; the photographed card uses the complete layered arch, two-tone bow, and clear crystal accents.

Frequently Asked Questions

Can a press plate be used for hot foiling?

The plate used here is specifically named a Press + Foil Plate and is used for hot foiling in this project. Lea combines it with the Original Glimmer Hot Foil System and Polished Brass hot foil. Check the compatibility information for your particular plate and system before using another product in the same way.

Which side of the hot foil faces the plate?

In this setup, the shiny colored side faces down toward the heated plate, and the white cardstock sits above the foil. Lea describes this as placing the “pretty side down.” Add the foiling plates in the recommended order, then pass the prepared platform through the compatible die-cutting machine.

Do I need a cardstock shim for hot foiling?

Lea uses a cardstock shim when foiling press plates in her setup. That is her personal adjustment rather than a requirement for every combination of machine, plate, foil, and cardstock. Begin with your system’s instructions, then test any recommended adjustment before preparing all the sentiment panels for a batch of cards.

How can I use leftover cardstock strips for more Christmas cards?

Repeat the striped background on additional card bases, then change the greeting or color order. This project cuts strips from several cardstock colors, leaving extras after the first card. Lea suggests using those pieces for more holiday cards and featuring different sentiments while keeping the same basic layout.

More Christmas Card and Foiling Ideas from Spellbinders

This Christmas card combines a foiled greeting with a colorful striped background and a dimensional arch frame. Once you’ve prepared the first set of die-cuts, use the extra strips to build more holiday cards with different greetings. I hope you enjoyed seeing the design come together and feel inspired to explore your own combination of stripes, foil, and festive details!

About Lea Lawson

Lea Lawson shares cardmaking projects and tutorials at Lea Lawson Creates. This project demonstrates her approach to hot foiling, layered die-cuts, and colorful paper backgrounds. Find more inspiration on her Instagram feed and YouTube channel.

Spellbinders Supplies:

Leave a comment

Your email will not be published. Please note, comments need to be approved before they are published.


  • How to Layer Nesting Circle Dies for Beautiful Christmas Cards, S4-114, S4-293, S4-124, S4-1453, S6-259, BP-312

    BP-312

    How to Layer Nesting Circle Dies for Beautiful Christmas Cards

    Nesting dies are among the most versatile tools in any cardmaker's collection, but combining multiple nesting die sets can create even more intricate and eye-catching designs. In this step-by-step Christmas card tutorial, you'll learn how to layer three different circle die sets to create a detailed focal point, then enhance it with festive stripes, winter foliage, a die-cut bird, and a foiled holiday sentiment. This...

  • Creative Ways to Use Basic Shape Dies for Cardmaking, S4-246, S4-110, S4-904, S4-124, S4-139, S4-114, S4-511, S4-477, S4-293, S5-738, S5-785, STP-300, S4-1452, BP-377, S4-1280

    BP-377

    Creative Ways to Use Basic Shape Dies for Cardmaking

    Basic shape dies are among the most versatile tools in any craft room. While they're often used for simple layering, they can do much more. In this tutorial, you'll learn several creative ways to use circles, rectangles, labels, and ovals to create custom frames, shaped cards, dimensional focal points, and layered backgrounds. These techniques are perfect for cardmakers who want to get more value from...

  • How to Make an Interactive Snowboard Card with a Sliding Character, S5-786, STN-139, S5-785, STP-300, S4-1503, S5-748

    S4-1503

    How to Make an Interactive Snowboard Card with a Sliding Character

    Create a playful interactive winter card featuring a snowboarding fox that slides across a snowy landscape and spins as it moves. In this step-by-step tutorial, you'll learn how to build a layered stenciled background, assemble an adorable winter fox, create a snowboard scene, and incorporate an easy interactive mechanism using Pear Blossom Press Snap 'n Slide discs. This project is perfect for cardmakers who want...