Layering two colors of wax is an effective way to emphasize the raised design of a wax seal without using a metallic marker. In this tutorial, you’ll learn how to coat the design on a wax seal stamp with one color before pressing it into a contrasting wax base. The result is a crisp, permanent two-color impression that can become the focal point of a handmade card. Once you understand the process, you can create high-contrast black-and-white seals, tonal combinations using light and dark shades or elegant metallic accents. You’ll also find three card ideas showing how to coordinate layered wax seals with 3D embossed backgrounds, BetterPress flowers, die-cut sprigs and foiled sentiments.
Hey there! It’s Daniel West, and I have some helpful tips for mixing and layering wax beads to take your seals to the next level. If I graded this tutorial for difficulty, I would give it a 5 out of 10.
I prefer this method of layering seals to coloring them with a marker because it creates a sharp impression with clear contrast. Because the accent color is made from wax, it becomes a permanent part of the finished seal and does not wipe away when touched.
Project Snapshot
| Skill Level | Intermediate; rated 5 out of 10 by the designer |
|---|---|
| Approximate Time | 60 Minutes |
| Project Type | Three handmade cards with layered wax seal embellishments |
| Techniques | Layered wax seals, mixed wax colors, 3D embossing, BetterPress printing, die cutting and hot foiling |
| Occasions | Just because, sympathy and love |
| Finished Size | A2 for the Just Because card; remaining finished sizes were not specified in the original tutorial |
| Featured Technique | Layering one wax color over a contrasting wax seal base |
What You’ll Need
Spellbinders Products
Spellbinders Supplies:
Other Supplies
- Wax melting spoon
- Wax spoon holder
- Votive or tealight candle
- Heat-safe silicone or rubber mat
- Palette knife
- Napkin or paper towel
- Liquid adhesive
- Foam tape
- Gold metallic ink
- Iridescent and gold embellishments
Safety Note: This technique uses an open flame, hot wax and a heated spoon. Work on a clear, heat-safe surface and keep the candle, melted wax and heated supplies away from children, pets and flammable materials.
How the Layered Wax Seal Technique Works
A traditional wax seal is made by melting wax beads, pouring the wax onto a heat-safe surface and pressing a wax seal stamp into the melted wax. For this layered technique, the raised design on the stamp is first coated with a contrasting wax color. After that layer cools, the coated stamp is pressed into a freshly poured base color.
When the stamp is removed, the first wax color remains inside the recessed design of the finished seal. This creates a sharp two-color impression without applying ink or paint after the seal has been made.
How to Make a Layered Two-Color Wax Seal
Step 1: Prepare and Warm the Wax Seal Stamp
Gently warm the brass wax seal stamp head over the votive candle flame, or allow it to rest in the melted accent wax for approximately one minute. Warming the stamp helps the wax release more easily when you clean the unwanted wax away after the first dip.
Have a palette knife ready before dipping the stamp. You will need to work with the wax while it is still soft enough to remove from the unwanted areas.
Step 2: Dip the Stamp into the Accent Wax
Melt the wax color that you want to appear in the raised design of the finished seal. Dip the wax seal stamp head into the melted wax.
This accent color will form the top layer of the design. For example, Daniel used white wax over a black base, light teal over a dark teal base and gold over a black base.
Step 3: Remove the Excess Wax
Scrape the stamp gently along the edge of the melting spoon. Use the palette knife to remove excess wax from the outer edge and flat areas of the stamp head.
The goal is to leave wax primarily inside the engraved portions of the design. Removing the wax carefully helps create the clean contrast seen in the finished impression.
Designer Tip: This cleanup step takes practice. Work slowly with the palette knife and remove small amounts of wax at a time until the flat surface of the stamp is clean.
Step 4: Let the Accent Wax Cool
Set the prepared wax seal stamp aside and allow the accent wax to cool completely. The wax must be firm before the stamp is pressed into the hot base color.
Step 5: Prepare the Base Wax Color
Clean the melting spoon with a napkin or paper towel, following the instructions for your wax sealing supplies. Add the wax beads for the base of the seal and melt them completely.
You can use a single wax color, combine different shades of the same color or mix several colors to create a marbled base.
Step 6: Pour and Stamp the Base Layer
Pour the melted base wax onto the heat-safe silicone or rubber mat. Press the prepared, fully cooled wax seal stamp into the center of the hot wax as you normally would.
Allow the seal to cool completely before lifting the stamp. When you remove it, the accent wax should remain within the impression, revealing the layered two-color design.
Prepare the Embossed and BetterPress Card Elements
For all three cards, Daniel used the Criss Cross Motif 3D Embossing Folder to create the backgrounds.
Use the Mighty Mister Spray Bottle to lightly moisten each cardstock panel before placing it inside the embossing folder and running it through the Platinum 6 Die Cutting and Embossing Machine.
Daniel also used the Pressed Posies Press Plate and Die Set on each card. Ink the plates with BetterPress Black Ink and press them into BetterPress Porcelain A2 Cotton Card Panels. Cut the pressed flowers and leaves with their coordinating dies.
Use the You Are Everything Sentiments Press Plate and Die Set to create the sentiments for the first two cards.
Card 1: Black-and-White Just Because Wax Seal Card
The first design uses a classic black-and-white color combination. The wax seal coordinates with the black die-cut botanical elements, while the white embossed cardstock and BetterPress florals keep the card bright.
Create the Torn Embossed Background
Emboss a panel of white cardstock with the Criss Cross Motif 3D Embossing Folder. Tear the panel in half at an angle, then adhere it to an A2 white card base with liquid adhesive.
The torn diagonal edge creates an irregular transition between the embossed cardstock and the smooth card base.
Die Cut and Arrange the Botanical Elements
Die cut the Sealed Berry Sprig Etched Dies and Sealed Twine Etched Dies from Brushed Black Cardstock.
Layer the black berry sprig, a flower and petals from the Pressed Posies die cuts and the Sealed Twine on the card front. Adhere the pieces with liquid glue. Wrap the end of the twine die cut around the back of the card and secure it with additional adhesive.
Make the Black-and-White Layered Wax Seal
Create the seal using white wax for the detailed top layer and black wax for the base. Daniel used beads from the Must-Have Wax Bead Mix in Basic with the Timeless Blooms Wax Seal Stamp.
Attach the completed seal over the botanical arrangement. Finish the card with the “Just Because” sentiment raised on foam tape and add iridescent embellishments.
Card 2: Tonal Teal I Am So Sorry Wax Seal Card
The second card follows the same basic construction but uses cardstock colors selected to coordinate with the layered teal wax seal.
Mix a Darker Teal Base
Use the Must-Have Wax Bead Mix in Teal for the seal. To darken the base, add one Ink Wax Bead while melting the teal mixture.
Coat the design of the stamp with light teal wax, allow it to cool and then press it into the darker teal mixture. The combination creates a tonal layered seal with a light teal design over a marbled dark teal base.
Coordinate the Cardstock with the Seal
Select cardstock colors that repeat the light and dark teal shades in the finished seal. Use the embossed panel, pressed floral pieces and sentiment to build the card using the same general arrangement as the first project.
Repeating the seal colors throughout the card helps the dimensional wax element feel integrated into the design.
Card 3: Black-and-Gold Made with Love Wax Seal Card
The final card uses a dramatic black-and-gold palette. The metallic wax detail coordinates with the Mirror Gold cardstock, gold ink and foiled sentiment.
Create the Black and Gold Background
Use Brushed Black Cardstock for the background. Separate the black sprigs and BetterPress flowers from the dark background by placing a circle of Mirror Gold Cardstock behind the arrangement.
Add a swipe of gold metallic ink to introduce another gold detail and reinforce the metallic palette.
Layer Gold Wax over a Black Base
Use gold wax to coat the design on the wax seal stamp. Once that layer has cooled, press the prepared stamp into melted black wax from the Must-Have Wax Bead Mix in Basic.
The metallic gold design creates strong contrast against the black wax base and coordinates with the cardstock and sentiment details.
Add the Foiled Sentiment
Daniel used a previously prepared gold-foiled sentiment strip from a Glimmer of the Month set. Trim the flag ends from the strip, divide the sentiment into two sections and tuck the pieces beneath the wax seal. Raise the sentiment pieces with foam tape and complete the card with gold embellishments.
Tips for the Best Layered Wax Seals
- Prepare your cleanup supplies first. Have the palette knife and napkin ready before dipping the stamp into the accent wax.
- Remove excess wax while it is still workable. Clean the flat areas of the stamp before the wax becomes too firm.
- Let the accent layer cool completely. A cooled first layer is less likely to blend into the hot base wax.
- Use contrasting colors for a graphic result. Black with white or black with gold makes the stamped design especially noticeable.
- Combine related colors for a tonal seal. A light teal design over a dark teal base creates contrast while keeping the palette cohesive.
- Mix shades in the base wax. Add a darker bead to a lighter mixture to adjust the color and create a marbled appearance.
- Allow the completed seal to cool fully. Removing the stamp too early can distort the impression.
- Practice the cleanup step. The amount of wax left on the stamp determines how crisp the two-color impression will appear.
Ways to Customize This Wax Seal Technique
- Layer white wax over a pastel base for a soft, elegant effect.
- Use metallic gold or silver wax over dark colors for formal cards and invitations.
- Mix two or more related shades to create a marbled base beneath a solid-color design.
- Coordinate the cardstock, flowers and embellishments with the colors in the wax seal.
- Use layered seals on envelopes, gift tags, handmade packaging or card fronts.
- Pair botanical wax seal designs with pressed or die-cut flowers.
- Create several seals at once and keep them ready for future cards and packaging projects.
Layered Wax Seal FAQ
How is a layered wax seal different from a marbled wax seal?
A layered wax seal uses one wax color specifically within the stamped design and a second color for the base. A marbled seal mixes multiple wax colors within the base itself. You can combine both techniques in one seal.
Why should the first wax layer cool before stamping the base?
Cooling allows the accent wax to become firm before it touches the hot base wax. This helps the two colors remain visually distinct.
Which colors work best for layered wax seals?
Contrasting combinations such as black and white or black and gold create bold definition. Light and dark shades from the same color family create a softer tonal result.
Can I use this technique instead of coloring a finished seal?
Yes. Daniel prefers layering wax because the contrasting color becomes part of the finished seal rather than being applied to the surface afterward.
Can layered wax seals be prepared in advance?
Yes. Make the seals on a heat-safe silicone mat, allow them to cool completely and store them until you are ready to attach them to cards, envelopes, tags or packaging.
More Wax Seal Ideas from Spellbinders
- Wax Seal Card Ideas with Sealed for Spring – Explore three ways to use wax seals, including another approach to making a double-layered seal.
- Wax Seals Weekend Inspiration – Discover friendship cards and other projects featuring wax seals, metallic accents and botanical die cuts.
- Handmade Wax Seal Cards with Jyoti – Find ideas for using wax seals on gatefold cards, belly bands and dimensional card designs.
- Add the Perfect Finishing Touch with Mini Wax Seals – Learn how to make smaller wax seals for cards, envelopes and gift packaging.
- How to Make Two-Color Mini Wax Seals – See another technique for combining two wax colors in a detailed seal.
Create Crisp Contrast with Layered Wax
Layering wax directly on the stamp creates a crisp, permanent contrast that makes the seal design easier to see. Begin with a bold combination such as white over black, then experiment with tonal or metallic palettes as you become more comfortable removing the excess wax. Coordinate the finished seal with embossed cardstock, BetterPress florals and die-cut details to create a dimensional focal point that feels connected to the complete card design.
About the Designer
Daniel West is a cardmaker and paper crafter who shares handmade card projects, creative techniques and paper crafting inspiration at Del & Artie.

1 comment
I love these three cards and can’t wait for the video to clarify it a bit more for me. The addition of the die cuts and the role of the pieces of embossed cardstock bring new dimension to these cards that I had not thought about before. Thank you.