Gift Boxes Christmas Card Tutorial with Gift Boxes and Bags Etched Dies
on August 11, 2026

How to Make a Die-Cut Gift Christmas Card with an Unexpected Color Palette

Explore a different Christmas color palette with a card full of die-cut gift boxes and bags. In this step-by-step photo tutorial, you’ll learn how to translate an inspiration image into cardstock colors, assemble the miniature gifts, and create a textured background using a BetterPress plate without ink. A pressed “Wrapped with Love” sentiment, white snowflakes, and silver gems finish the design.

Hello crafters! It’s Lisa Tilson here with you today. I’m using the Gift Boxes and Bags Etched Dies by Lisa Horton from the Snowflake Kisses Collection. Sometimes it’s fun to create with unexpected colors, so I used the Holiday DIY Color Deck Expansion Pack to choose this combination of pinks, coral, light blue, and deep teal. Let’s turn that inspiration into a card!

Christmas card with colorful die-cut gift boxes and bags, white snowflakes, and a Wrapped with Love sentiment

Project Snapshot

Project Christmas card with layered die-cut gifts
Finished Size A2, 4¼″ × 5½″, top folding
Techniques Color-palette planning, die-cut assembly, blind letterpress, inked letterpress, and dimensional layering
Color Palette Blush, Tutu, Sicily, Windy, Oceanside, and Classic White
Featured Products Gift Boxes and Bags, Holiday DIY Color Deck Expansion Pack, Sprinkled Confetti, and Snowflake Kisses Sentiments
Experience Recommended Basic die cutting and familiarity with the BetterPress Letterpress System

What You’ll Need

Dies, Press Plates, and Color-Planning Supplies

Cardstock, Ink, and Embellishments

Tools and Adhesives

Spellbinders Supplies:

Choose a Christmas Color Palette from an Inspiration Image

Step 1: Match the Image to Cardstock Swatches

The original DIY Color Deck contains 52 inspiration cards with an image and five spaces for color swatches. The Holiday DIY Color Deck Expansion Pack adds 12 cards for seasonal inspiration.

Choose an inspiration card, then find cardstock colors that reflect its main colors. For this project, I selected Blush, Tutu, Sicily, Windy, and Oceanside, with Classic White for the ribbons, snowflakes, and card base.

Use the 1″ Square Punch to make a swatch of each color. Attach the swatches to the inspiration card temporarily or permanently, depending on how you want to use your deck.

Holiday Color Deck inspiration with coordinating pink, coral, blue, and teal cardstock swatches

Die Cut and Assemble the Gift Boxes and Bags

Step 2: Cut the Gift Pieces

Arrange the Gift Boxes and Bags dies on the selected cardstock colors, using the photo as a guide.

Photo Note: The dies are shown cutting-side up for identification. Turn them over so the cutting edges face the cardstock before securing them with tape.

Gift Boxes and Bags dies arranged over the selected cardstock colors for reference

For all standard die cutting in this tutorial, use the following Platinum SIX Universal Plate System sandwich, listed from bottom to top:

  1. A Platform Base
  2. B Platform Top
  3. C Cutting Plate
  4. Cardstock with the die on top, cutting edge down
  5. C Cutting Plate

Run the dies through the machine. Follow your machine’s instructions if using a different plate system.

Die cutting the miniature gift pieces with the Platinum SIX

Place the cut pieces in a Medium Craft Stax Tray, then cut the remaining pieces.

Keeping the small gift die cuts organized in a Craft Stax tray

Step 3: Assemble the Long Box and Gift Sack

Begin with the long, shallow box cut from Sicily cardstock. Apply a narrow line of Bearly Art Glue along the top edge and attach its white lid.

Attaching a white lid to the long Sicily-colored gift box

Take the light-blue sack and attach the two Oceanside pieces with small dabs of liquid glue.

Adding deep teal details to the light-blue gift sack

Glue the white die-cut string around the neck of the sack to finish it.

Finishing the gift sack with a white die-cut tie

Step 4: Assemble the Teal Box and Flat Pink Box

Use the Precision Tool from the Handy Craft Tool Set to remove the tiny pieces from the light-blue box-top and ribbon die cut.

Removing small cutouts from the light-blue gift-box ribbon detail

Glue the light-blue piece onto the dark-teal box.

Attaching the light-blue lid and ribbon to the deep teal gift box

For the flat pink box, adhere the Blush lid to the Tutu base.

Layering a Blush lid onto the Tutu pink gift box

Add the white ribbon on top.

Finishing the flat pink gift box with a white ribbon

Step 5: Build the Dimensional-Look Pink Box

Take the Tutu box base and adhere the diamond-shaped top piece in place.

Adding the diamond-shaped top to the pink gift-box base

Attach the light-pink piece to the left side of the box.

Adding the light-pink left side of the gift box

Add the darker-pink piece to the right side.

Completing the two-tone pink sides of the gift box

Glue the white ribbon in place to finish the box.

Finished two-tone pink gift box with white ribbon

Step 6: Assemble the Gift Bag

Attach the tiny light-blue side detail to the right side of the gift bag.

Adding the light-blue side detail to the coral gift bag

Glue the two light-blue circles onto the bag. These provide the attachment positions for the front handle.

Positioning the light-blue circles beneath the gift-bag handle

Attach both handles to the bag.

Attaching the two handles to the die-cut gift bag

Glue the light-blue tag at an angle near the bottom of the handle. Assemble both layers of the small flower and attach it over the tag.

Finishing the gift bag with an angled tag and a layered white flower

Create the BetterPress Background and Sentiment

Step 7: Press the Confetti Background Without Ink

Place the Sprinkled Confetti Press Plate on the BetterPress magnetic platform. Secure an A2 Porcelain BetterPress panel to the underside of the clear platen with Best Ever Craft Tape.

Leave the plate uninked. Flip the platen over, position it on the platform, and run the BetterPress system through the die-cutting machine according to the system’s instructions.

Preparing an uninked Sprinkled Confetti plate and Porcelain cardstock in the BetterPress system

The uninked plate creates a blind letterpress impression - recessed texture without an inked image. It adds background interest while keeping the panel white.

Lisa’s Tip: Additional BetterPress shims can deepen the impression. Make any pressure adjustments within the guidance for your system.

Subtle confetti texture pressed into white cotton cardstock without ink

Step 8: Press and Die Cut the Sentiment

Position the plate containing “Wrapped with Love” from the Snowflake Kisses Sentiments set on the BetterPress magnetic platform.

Secure another A2 Porcelain BetterPress panel to the underside of the platen. Apply Spruce BetterPress Ink to the plate using a pounce-and-pivot motion. Replace the platen and run the system through the machine.

Pressing the holiday sentiments with Spruce BetterPress Ink

Align the coordinating die over the pressed sentiments, tape it in place, and die cut using the standard cutting sandwich.

Die cutting the pressed sentiments with the coordinating Snowflake Kisses die

Step 9: Cut the White Snowflakes

Die cut an A2 panel of Classic White cardstock with the Frozen Flurries Etched Dies. Remove the snowflakes and keep them in a Craft Stax tray until assembly.

Small white snowflakes die cut with Frozen Flurries

Arrange the Gifts and Finish the Card

Step 10: Position the Sentiment and Gift Stack

Add small White Foam Squares to the back of the “Wrapped with Love” sentiment and remove the release liners.

Adding foam squares behind the Wrapped with Love sentiment

Temporarily arrange three boxes on the background to guide the sentiment placement. Attach the sentiment approximately one-fifth of the way up from the bottom of the panel.

Using the gift boxes to guide placement of the sentiment near the bottom of the panel

Adhere the three stacked boxes one at a time with liquid glue.

Gluing the stacked gift boxes above the sentiment

Step 11: Add the Remaining Gifts

Temporarily position the sack and gift bag, then glue the remaining pink box in place.

Planning the remaining gift arrangement and attaching the lower pink box

Attach the sack with liquid glue.

Attaching the blue gift sack beside the stacked presents

Add a small piece of foam tape to the right of the sack and attach the gift bag over it.

Raising the coral gift bag with foam tape in front of the other presents

Step 12: Add Snowflakes and Silver Gems

Add a Silver Mix gem to the light-blue box-top and ribbon detail. Add another to the white ribbon around the pink box at the bottom right.

Decorating the gift ribbons with silver gems

Glue white snowflakes onto the top box, the sack, and the pink box at the bottom right. Add silver gems to the snowflakes on the sack and lower pink box.

Adding white snowflakes and silver gems to the colorful gifts

Step 13: Mount the Panel on a Top-Folding Card Base

Cut Classic White cardstock to 11″ × 4¼″. Score and fold at 5½″ to create a top-folding A2 card base.

Adhere the decorated panel to the front.

Mounting the completed gift arrangement onto a top-folding white card base

Place the finished card beside the inspiration card to see how the selected colors have carried through the design.

Finished Christmas gift card beside the Holiday Color Deck palette that inspired it

Tips for Color Planning and Small Die-Cut Assembly

  • Choose the palette before cutting. Matching cardstock swatches to the inspiration image gives you a reference throughout the project.
  • Check die orientation. The reference photo shows the cutting edges facing up; turn the dies over before cutting.
  • Keep small pieces together. Store cut pieces in a tray while completing the remaining die cutting.
  • Clear tiny openings before gluing. Use a precision tool on the light-blue ribbon detail before attaching it to the box.
  • Arrange before adhering. Temporarily position the gifts to establish the overlaps and sentiment placement.
  • Combine flat and raised elements. Liquid glue holds most gifts flat, while foam adhesive raises the sentiment and gift bag.

Ways to Customize This Gift Card

Use the same dies and layout as a starting point for these variations:

  • Choose another inspiration image. Match five different cardstock colors to a different Color Deck card.
  • Try a traditional Christmas palette. Explore reds and greens with white ribbons and snowflakes.
  • Adapt the gifts for a birthday. Change the greeting and leave off the snowflake decorations.
  • Explore an inked background. For a different effect, add ink to the confetti plate instead of creating a blind impression.

Frequently Asked Questions

How do I use a Color Deck card to choose cardstock?

Look at the main colors in the inspiration image, select cardstock that reflects those colors, and punch 1″ square swatches. Attach the swatches to the card as a reference for your project.

Which cardstock colors are used on this Christmas card?

The five-color palette is Blush, Tutu, Sicily, Windy, and Oceanside. Classic White is used for additional details and the card base.

Can I use a BetterPress plate without ink?

Yes. This tutorial uses the uninked Sprinkled Confetti plate with Porcelain BetterPress cotton cardstock to create a blind letterpress impression: texture without an inked design.

Which ink is used for the Wrapped with Love sentiment?

Lisa uses Spruce BetterPress Ink from the Woodlands BetterPress Ink Mini Set.

How is the top-folding A2 card base made?

Cut cardstock to 11″ × 4¼″, then score and fold at 5½″. The folded card measures 4¼″ × 5½″.

More Christmas Cardmaking and BetterPress Ideas

I hope you found today’s tutorial helpful. Using an inspiration image can lead you toward colors you might otherwise overlook, and it’s a fun way to experiment with supplies you already enjoy. Try a different palette and see where it takes your next card! Thank you so much for joining me today. I hope you have a wonderful day!

About the Designer

Lisa Tilson created this card and step-by-step photo tutorial. Find more of her projects on My Card Trip, Instagram, Facebook, and YouTube.

Leave a comment

Your email will not be published. Please note, comments need to be approved before they are published.


  • How to Layer Nesting Circle Dies for Beautiful Christmas Cards, S4-114, S4-293, S4-124, S4-1453, S6-259, BP-312

    BP-312

    How to Layer Nesting Circle Dies for Beautiful Christmas Cards

    Nesting dies are among the most versatile tools in any cardmaker's collection, but combining multiple nesting die sets can create even more intricate and eye-catching designs. In this step-by-step Christmas card tutorial, you'll learn how to layer three different circle die sets to create a detailed focal point, then enhance it with festive stripes, winter foliage, a die-cut bird, and a foiled holiday sentiment. This...

  • Creative Ways to Use Basic Shape Dies for Cardmaking, S4-246, S4-110, S4-904, S4-124, S4-139, S4-114, S4-511, S4-477, S4-293, S5-738, S5-785, STP-300, S4-1452, BP-377, S4-1280

    BP-377

    Creative Ways to Use Basic Shape Dies for Cardmaking

    Basic shape dies are among the most versatile tools in any craft room. While they're often used for simple layering, they can do much more. In this tutorial, you'll learn several creative ways to use circles, rectangles, labels, and ovals to create custom frames, shaped cards, dimensional focal points, and layered backgrounds. These techniques are perfect for cardmakers who want to get more value from...

  • How to Make an Interactive Snowboard Card with a Sliding Character, S5-786, STN-139, S5-785, STP-300, S4-1503, S5-748

    S4-1503

    How to Make an Interactive Snowboard Card with a Sliding Character

    Create a playful interactive winter card featuring a snowboarding fox that slides across a snowy landscape and spins as it moves. In this step-by-step tutorial, you'll learn how to build a layered stenciled background, assemble an adorable winter fox, create a snowboard scene, and incorporate an easy interactive mechanism using Pear Blossom Press Snap 'n Slide discs. This project is perfect for cardmakers who want...