Turn die-cut felt into a pair of soft, dimensional Pooh Bear and Hunny Pot ornaments with this detailed stitching tutorial. Using the Stitched Classic Pooh Etched Dies, you will learn how to cut the felt pieces, create internal padding, add optional embroidery, stitch the layers together and lightly stuff each ornament.
The finished felt pieces can be used as hanging ornaments or connected to create a coordinating bag charm. You can also adapt the same dies for banners, cards and scrapbook layouts. The step-by-step photographs show how the individual layers fit together, while practical tips help you avoid common problems when gluing, stitching and stuffing die-cut felt.
Hello, crafty friends! I’m Adrienne Boese, better known online as Alice Scraps Wonderland. Today, I’m taking you through the complete process for creating these stitched felt Pooh Bear and Hunny Pot projects.
![]()
Project Snapshot
| Skill Level | Beginner-friendly stitching project |
| Approximate Time | 60+ minutes |
| Project Type | Felt ornaments or bag charms |
| Techniques | Felt die cutting, hand stitching, embroidery, layering and stuffing |
| Occasion | Not specified in the original tutorial |
| Finished Size | Not specified in the original tutorial |
| Featured Product | Stitched Classic Pooh Etched Dies |
What You’ll Need
Spellbinders Products
- Stitched Classic Pooh Etched Dies
- Classic Pooh Collection Merino Wool Felt Sheets
- Platinum Die-Cutting Machine
Spellbinders Supplies:
Other Supplies
- DMC embroidery needles
- DMC Cotton Floss #744
- DMC Cotton Floss #794
- DMC Cotton Floss #321
- DMC Cotton Floss #907
- DMC Cotton Floss #3782
- DMC Ecru Cotton Floss
- Polyester filling
- Heat-erasable fabric-marking pens
- Liquid craft glue
- Craft pick, pencil eraser or wax-tipped embellishment wand
- Acrylic stamping blocks
- Embroidery scissors
- Coordinating cord for an optional bag charm
Choose Felt for the Pooh Bear and Hunny Pot
I highly recommend using the Classic Pooh Collection Merino Wool Felt Sheets for this project. The felt is high quality, cuts nicely with dies and includes the coordinating colors needed to create Pooh Bear and the Hunny Pot.
Because felt contains fibers that may not cut completely during a single pass, run each die through the Platinum Die-Cutting Machine twice. Before removing the die, check that every edge has cut cleanly.
![]()
Step 1 – Die Cut the Felt Pieces
Cut the Pooh Bear Pieces
Use the Stitched Classic Pooh Etched Dies to cut the following pieces:
- One Pooh Bear body with the ear and eye openings cut from yellow felt
- One solid Pooh Bear body layer cut from yellow felt
- Six Pooh Bear legs cut from yellow felt
- Six Pooh Bear arms cut from yellow felt
- Two Pooh Bear noses and two circles cut from black felt
Cut the Hunny Pot and Bee Pieces
- Two Hunny Pot jars cut from tan felt
- Three jar lids cut from blue felt
- One jar label with letters cut from blue felt
- One solid jar-label layer cut from blue felt
- One solid jar-label layer cut from white felt
- Two honey drips cut from golden-yellow felt
- Two bee base layers cut from black felt
- Two bee-stripe layers cut from golden-yellow felt
- Two bee wings cut from white felt
Step 2 – Create the Padded Felt Pieces
Trim the Internal Felt Layers
Several of the die-cut felt pieces will be used as internal padding. Using felt for these small padded areas is easier than trying to push polyester filling into the narrow arms, legs and jar lid.
Set aside two arms, two legs and one jar lid for the internal layers. Trim at least 1/8 inch from every side of these pieces. Trim the ball-shaped handle completely from the internal jar-lid layer.
Glue the Felt Sandwiches
Use liquid glue to attach each trimmed internal layer between its two corresponding outside pieces. Make a felt sandwich for each pair of arms, legs and the jar lid.
If you are turning the projects into connected bag charms, place one end of the cord inside the jar sandwich. Glue the other end to the inside of the solid Pooh Bear body layer.
![]()
Designer Tip: Apply glue only to the internal stuffing pieces and leave the outside edges glue-free. A needle can be difficult to push through hardened, dried glue.
Step 3 – Assemble the Small Decorative Elements
Add the Eye and Ear Backings
![]()
Use liquid glue to attach the black felt circles to the back of the Pooh Bear layer, covering the openings for the eye and ear.
You may want to trim the black circles slightly, especially around the ear. Keeping the black felt away from the outside edge of the yellow felt produces a cleaner finished result.
Assemble the Label and Bees
- Glue the blue jar label with the cutout letters onto the white label-backing layer.
- Attach one golden-yellow stripe layer to each black bee body.
![]()
Designer Tip: Place acrylic stamping blocks on top of the glued felt layers while they dry. The weight helps the layers make better contact. Allow the glue to dry completely before adding any stitching.
Step 4 – Stitch the Hunny Pot Details
Position and Stitch the Jar Labels
Glue the label with the letters onto one tan jar layer. Hold the two jar layers back-to-back and use the first label as a positioning guide for the solid label on the second jar layer. This helps the labels align on both sides of the finished ornament.
Use DMC Cotton Floss #794 to stitch around the blue jar lid and both blue labels. I used a straight running stitch, but a blanket stitch can also be used. The bottom of the jar lid can remain unstitched.
Stitching the labels to the jar layers at this stage makes them especially secure, which is helpful if the finished piece will be used as a bag charm.
Add Optional Floral Embroidery
If desired, add embroidery to the felt before assembling and stuffing the jar. I added a woven-wheel rose to both the front and back of the jar with DMC Cotton Floss #321. I then added lazy-daisy leaves with DMC Cotton Floss #907.
Designer Tip: Use a heat-erasable fabric-marking pen to sketch an optional embroidery design onto wool felt. After stitching, carefully apply heat to remove any visible marks. Do not apply heat to acrylic felt.
![]()
Step 5 – Assemble and Stuff the Hunny Pot
Attach the Lid and Join the Jar Layers
Glue the blue jar lid to both tan jar layers, sandwiching the bottom of the lid between the two tan pieces. Glue the jar layers together along the sides, leaving the bottom open for stuffing.
Stitch Around the Jar
Thread an embroidery needle with DMC Cotton Floss #3782. Leave a long thread tail at the beginning, then start stitching at one bottom corner. Continue around the sides and top until you reach the opposite bottom corner.
When stitching near the labels, hide the tan thread beneath the blue label layers by stitching only through the tan and white felt. This requires patience, but it creates a cleaner finished appearance.
Stop before closing the bottom, leaving the needle and thread attached.
Stuff and Close the Jar
Add a small amount of polyester filling through the opening. Avoid overstuffing because too much filling may distort the shape of the jar.
Continue stitching across the bottom to close the opening. If you used a running stitch, work back toward the starting point to fill the spaces between the first set of stitches. Tie the two thread tails together and trim away the excess.
Designer Tip: Use a pencil eraser or wax-tipped embellishment wand to push polyester filling into small felt pieces. The eraser or wax grips the filling fibers, making them easier to position.
![]()
Step 6 – Add the Honey Drips and Bees
Finish the Bees
Position one white wing on each assembled bee. Use DMC Ecru Cotton Floss and a French knot to attach the wing to the bee’s body.
Decorate the Hunny Pot
Glue the golden-yellow honey drips onto the stitched jar. Attach one completed bee to the front and the second bee to the back with liquid glue.
Step 7 – Stitch and Assemble Pooh Bear
Stitch the Arms and Legs
Use DMC Cotton Floss #744 to stitch together the padded arm and leg pieces. Leave a long thread tail at the beginning of each piece. Stitch around the edges, tie the ends securely and trim the excess floss.
Attach the Limbs to the Body
Attach one arm and one leg to the front Pooh Bear layer. Attach the remaining arm and leg to the back layer.
I used one straight stitch, passing over the same stitch two or three times to secure each limb. Leave enough space around the outside edges of the body for the final stitching.
Join and Stuff the Body
Glue the two Pooh Bear body layers together, leaving the bottom open. Begin stitching at one bottom corner with DMC Cotton Floss #744, leaving a long thread tail. Stitch around the body until you reach the opposite bottom corner.
Take your time when stitching beneath the arms and legs. Add polyester filling through the opening, then finish stitching the body closed. Tie the floss ends securely and trim the excess.
Complete Pooh Bear by gluing a black felt nose onto each side.
Step 8 – Turn the Felt Pieces into Ornaments
To turn the finished felt pieces into ornaments, thread an embroidery needle with coordinating floss and add a hanging loop to the top of Pooh Bear and the Hunny Pot. I used DMC Cotton Floss #744 and #794.
If you added cord between the pieces during assembly, the completed project can instead be wrapped around the handle of a tote bag and used as a bag charm.
![]()
Tips for the Best Results
- Run each felt piece through the die-cutting machine twice to cut through the fibers completely.
- Check the cut before removing the felt and die from the cutting plates.
- Keep glue away from areas that will be stitched.
- Allow glued felt layers to dry completely before pushing a needle through them.
- Trim internal felt padding so it does not extend into the stitched edges.
- Use acrylic stamping blocks to hold glued layers flat while they dry.
- Add embroidery before joining and stuffing the main felt pieces.
- Use only a small amount of polyester filling to preserve the die-cut shape.
- Leave long thread tails so the stitches can be tied securely.
Ways to Customize the Felt Ornaments
- Change the embroidery colors to coordinate with a holiday tree, nursery or tote bag.
- Replace the woven-wheel roses with French knots, stars or simple leafy sprigs.
- Create individual hanging ornaments instead of connecting the pieces.
- Add cord between Pooh Bear and the Hunny Pot to make a bag charm.
- String several felt pieces with pom-poms or wool balls to create a banner.
- Cut the designs from cardstock instead of felt and use them on cards or scrapbook layouts.
- Skip the optional embroidery for a simpler, faster version.
Felt Die-Cutting and Stitching FAQ
Can thin metal dies cut wool felt?
Yes. Adrienne found it helpful to run each felt piece through the Platinum Die-Cutting Machine twice to make sure the felt fibers were cut completely.
Should the felt layers be glued before stitching?
Small amounts of glue can hold the layers in position, but keep the glue away from the outside edges. Dried glue may make it difficult to push the embroidery needle through the felt.
How do you add dimension to small felt arms and legs?
Cut an additional felt layer, trim approximately 1/8 inch from its outside edges and glue it between the two full-size pieces. This creates padding without trying to insert loose polyester filling into a very narrow opening.
When should embroidery be added to a stuffed felt ornament?
Add decorative embroidery before joining and stuffing the front and back layers. The flat felt is easier to hold and stitch.
Can these dies be used without stitching?
Yes. Because these designs do not have stitching holes, they can be cut from cardstock or felt and used without hand stitching on cards, banners and scrapbook layouts.
More Stitching and Classic Pooh Ideas from Spellbinders
- Learn 12 Helpful Tips for Creating with Stitching Dies
- Discover Four Ways to Use Stitching Dies Without Thread
- Create Classic Pooh Picture Frame Cards
- Use Classic Pooh Supplies for Cards and Scrapbook Layouts
- Make Darling Chalkboard Holiday Ornaments
Create Your Own Stitched Felt Keepsakes
The Stitched Classic Pooh Etched Dies can be used for much more than paper projects. With wool felt, embroidery floss and a small amount of filling, the die-cut shapes become soft ornaments or bag charms with plenty of handmade detail. Customize the embroidery, colors and finishing method to create a keepsake that suits your recipient or decorating style.
I hope you enjoyed this step-by-step tutorial for creating felt plushies with the Stitched Classic Pooh Etched Dies. Don’t forget to follow me on Instagram or visit my blog for more inspiration and tutorials. Until next time, happy crafting!
Adrienne
About the Designer
Adrienne Boese, known online as Alice Scraps Wonderland, creates colorful paper and felt projects featuring die cutting, hand stitching, embroidery and dimensional details. Follow Adrienne on Instagram for more creative inspiration.
