Ink blending is a foundational card-making technique that can be used to create colorful backgrounds, enhance die cuts, add color through layering stencils and draw attention to a stamped, pressed or foiled focal point. With only cardstock, ink and an applicator, you can create everything from a soft glow to a bold ombré background.
This beginner’s guide explains how cardstock, ink formulation and applicator choice affect the finished blend. You will learn the differences between dye, BetterPress, Distress, Distress Oxide and pigment inks, along with practical ways to avoid brush marks and muddy colors. A complete photo tutorial at the end shows how to blend three ink colors across an A2 panel while creating two additional transition colors.
Hello, card makers! Lisa Tilson here, and today we’re going to be talking about ink blending. Some crafters find ink blending tricky when they first start, but I hope this guide gives you the confidence to grab your supplies and begin experimenting.
Project Snapshot
| Skill Level | Beginner |
| Approximate Time | Not specified in the original tutorial |
| Project Type | Ink-blended card background |
| Techniques | Ink blending, color transitions, ombré blending and layered ink application |
| Occasion | All occasion |
| Finished Size | A2 panel, 4.25 × 5.5 inches |
| Featured Product | Large Blending Brushes |
What Can Ink Blending Be Used For?
Ink blending can be incorporated into handmade cards in many ways. You can:
- Create a colorful background for a stamped or die-cut scene.
- Add color to stamped, pressed or foiled images with layering stencils.
- Create a simple background behind a sentiment.
- Add shading and dimension to white or colored cardstock die cuts.
- Create an ombré panel with the lightest area in the center.
- Draw attention to one part of a clean and simple card.
- Blend several colors together to create new transition colors.
What You’ll Need
You do not need many supplies to begin ink blending. The three essential components are cardstock, ink and an applicator.
Spellbinders Products
Other Supplies
- Smooth white or colored cardstock
- Dye, Distress, Distress Oxide, BetterPress or pigment inks
- Ink reinkers
- Blending brushes, pouncers, daubers, brayers or blending foam pads
- Low-tack tape or temporary adhesive
- Scrap paper or sticky notes
- Baby wipes or a damp cloth
- Microfiber cloth or paper towel
- Mild soap for optional brush cleaning
Choose Cardstock for Ink Blending
The cardstock used for ink blending can make a noticeable difference. Generally, smoother cardstock makes it easier to create an even blend because the ink remains workable on the surface for longer.
Highly porous cardstock may absorb the ink more quickly, while heavily textured cardstock can make it more difficult to achieve a seamless transition. However, cardstock formulations vary, so test the papers you already have before deciding what works best for you.
Some textured papers—including Tim Holtz Distress Watercolor Cardstock and BetterPress Cardstock—can still produce beautiful ink-blended results.
Popular White Cardstock Choices
- Hammermill White 100 lb. Smooth Premium Color Copy
- Neenah Solar White Classic Crest 80 lb. or 110 lb. cardstock
- Ranger and Tim Holtz Distress Watercolor Cardstock
- BetterPress Cardstock
Try Blending on Colored Cardstock
You do not have to limit ink blending to white cardstock. White provides a neutral base and preserves the original ink colors, but colored cardstock can create a different effect and save time.
The cardstock color becomes the lightest shade in the blend, so you may only need to add medium and dark inks around the edges.
The card above begins with a pink cardstock panel. Several pink inks are blended inward from the edges, creating an ombré effect with the lightest area in the center.
The card on the left features aqua Distress Ink blended through the center of a Neenah Solar White Classic Crest 80 lb. panel. Concentrating the ink in this area guides the eye toward the hummingbird and flower.
On the right, aqua BetterPress Ink is blended over Porcelain BetterPress Cardstock. The color begins darker at the top and gradually fades toward the bottom.
Choose the Best Ink for Blending
Different inks produce different finishes. Your choice will depend on the supplies you have, the cardstock you are using and the finished appearance you want.
Dye Inks
Dye inks dry quickly and work well for blending. The ink soaks into the paper and may appear slightly lighter after it dries. Dye inks work particularly well on white and light-colored cardstock.
The card above features a black silhouette flower and sentiment stamped over a small ink-blended rectangle. Coordinating dye inks create a soft transition behind the crisp black image.
Some ink manufacturers organize dye inks into coordinated color families. These curated groups can be helpful for beginners because the shades are designed to work together.
BetterPress Inks
BetterPress Inks blend beautifully on BetterPress Cardstock, despite its textured surface. They can be used for simple backgrounds or applied through coordinating layering stencils.
The card above combines BetterPress and Hero Arts Core Inks with layering stencils on Porcelain BetterPress Cardstock. The letterpress texture remains visible while the ink creates smooth, dimensional color.
Distress Inks
Ranger and Tim Holtz Distress Inks are water-based dye inks. They have a brighter, more translucent appearance than Distress Oxide Inks and can be used for blending, water splatters and other water-reactive effects.
On the left, darker aqua Distress Inks are blended inward over light aqua cardstock. On the right, Distress Inks add extra color and dimension to cardstock die cuts.
Distress Oxide Inks
Distress Oxide Inks combine dye and pigment ink properties. The hybrid formula can make it easier to create soft transitions, which is why many crafters find Oxide Inks approachable for beginner blending.
They create a softer, more opaque and chalky finish than traditional dye inks.
The card above features purple and aqua Distress Oxide Inks blended over Porcelain BetterPress Cardstock. Drops of water create additional texture. Where the purple and aqua overlap, the inks produce touches of blue.
Color Tip: Overlapping compatible colors can create additional shades. This adds variety to the blend without requiring another ink pad.
Pigment Inks
Pigment inks dry more slowly because they remain on the surface of the cardstock. Their opacity makes them suitable for blending on both light and dark cardstock.
Why Reinkers Matter
In addition to choosing suitable cardstock, maintaining a well-inked pad is one of the most important parts of smooth ink blending.
If the pad is dry, the applicator cannot pick up enough ink to create an even blend. You may spend more time and pressure trying to cover the cardstock, which can lead to brush marks and uneven areas.
Reink ink pads regularly, especially before blending large backgrounds. Purchasing reinkers is an additional investment, but keeping the pads properly saturated can make the technique much easier.
Choose an Ink-Blending Applicator
Several different applicators can be used for ink blending:
- Blending brushes in large and small sizes
- Pouncers and daubers
- Brayers
- Flat or domed blending foam pads
Most crafters use different applicators depending on the size of the area and the technique. Large brushes cover backgrounds more efficiently, while small brushes provide control around detailed stencils and die cuts.
Prepare Your Work Surface
Sticky Mat
A sticky mat holds the cardstock securely while you blend. This allows you to move the brush without the panel shifting and reduces the need to place your fingertips on the cardstock.
Glass or Silicone Surface
A non-stick glass or silicone surface allows the blending brush to glide smoothly from the work surface onto the cardstock.
Both options work well. Choose the surface that feels most comfortable and provides the control you need.
Low-Tack Tape or Temporary Adhesive
If you are not using a sticky mat, secure the panel with low-tack tape or temporary adhesive.
Scrap Paper or Sticky Notes
Rest your free hand on scrap paper or a sticky note. This keeps natural oils from your fingertips from transferring to the cardstock. If you must touch an inked area, cover it with clean paper first.
Cleaning Supplies
Use baby wipes, a damp cloth or a damp paper towel to clean the work surface. Clean between ink colors to prevent accidental color transfer.
How to Clean Ink-Blending Brushes
Many crafters keep separate brushes for individual color families and do not wash them after every project.
To remove excess ink, wipe the brush on a microfiber cloth or paper towel. For deeper cleaning, wash the bristles lightly with water and mild soap. Allow the brush to dry completely before using it again.
Ink-Blending Tips for Beginners
- Practice with the inks and cardstock you already have. Different combinations will produce different results.
- Begin with smooth cardstock, but do not be afraid to test textured papers such as BetterPress Cardstock or Distress Watercolor Cardstock.
- Keep ink pads well saturated and reink them regularly.
- Begin blending off the edge of the panel, then move gradually onto the cardstock.
- If you must begin in the center, remove excess ink on scrap paper before touching the panel.
- Use a light hand and gentle circular motions.
- Build the color gradually with several light layers instead of applying heavy pressure.
- Choose an applicator appropriate for the size of the area.
- Allow the ink to dry before deciding whether the blend needs another layer.
- Keep separate brushes or applicators for different color families to avoid muddy colors.
Beginner Tip: Placing a heavily inked brush directly onto the cardstock can leave a dark circular mark. Begin off the edge whenever possible and move onto the panel gradually.
How to Blend a Three-Color Card Background
This step-by-step tutorial uses three Distress Ink colors:
- Salvaged Patina
- Squeezed Lemonade
- Worn Lipstick
Where Salvaged Patina overlaps Squeezed Lemonade, the inks create green. Where Squeezed Lemonade overlaps Worn Lipstick, they create orange. The finished panel therefore contains five visible colors created from only three ink pads.
The blend is created on the smoother side of an A2 panel of Tim Holtz Distress Watercolor Cardstock.
Step 1 – Secure the Cardstock
Place an A2 panel of Distress Watercolor Cardstock onto a sticky mat with the smoother side facing upward.
Step 2 – Begin with Salvaged Patina
Use a Large Blending Brush to apply Salvaged Patina Distress Ink to the top of the panel.
Begin with a light hand and use circular motions. Start the brush off the panel, then move gradually onto the cardstock.
Step 3 – Build the Aqua Color
Add several more light layers of Salvaged Patina. Bring the ink gradually downward until it covers approximately the top third of the panel.
Continue beginning off the edge before moving the brush onto the cardstock.
Step 4 – Add Squeezed Lemonade
Apply Squeezed Lemonade Distress Ink to the middle third of the panel. Use a blending brush already assigned to yellow inks to avoid contaminating the color.
Step 5 – Blend Yellow into Aqua
Add more Squeezed Lemonade to deepen the yellow area. Overlap the upper edge slightly with Salvaged Patina. A green transition will appear where the two colors meet.
Step 6 – Add Worn Lipstick
Apply Worn Lipstick Distress Ink across the bottom third of the panel. A large blending brush is used here even though the ink pad is small.
Reinking the pad before beginning provides enough ink for the larger brush to pick up the color efficiently.
Applicator Tip: A smaller brush can also be used for this step. A larger brush is simply faster when covering an A2 background.
Step 7 – Blend Pink into Yellow
Add another layer of Worn Lipstick and overlap the upper edge with the Squeezed Lemonade. An orange transition will appear where the pink and yellow meet.
Step 8 – Deepen the Aqua
Return to Salvaged Patina and add more color to the top of the panel. Blend downward into the yellow transition area.
Step 9 – Reinforce the Yellow Transitions
Add another layer of Squeezed Lemonade through the middle. Blend upward into the aqua and downward into the pink to soften both transitions.
Step 10 – Finish the Pink Area
Add a final layer of Worn Lipstick to the bottom of the panel. Blend over the lower edge of the yellow to complete the orange transition.
Step 11 – Allow the Panel to Dry
The panel is complete and features aqua, green, yellow, orange and pink created from three ink pads. Allow the ink to dry before deciding whether any area requires another layer.
Ways to Customize an Ink-Blended Background
- Change the three ink colors to coordinate with a specific occasion.
- Create a vertical, horizontal or diagonal blend.
- Use only one ink color and vary the pressure to create an ombré effect.
- Blend darker ink around the outside edges and leave the center light.
- Add water droplets to water-reactive inks.
- Apply ink through a stencil after completing the background blend.
- Blend onto colored cardstock instead of white.
- Add ink to cardstock die cuts for extra depth.
- Stamp, foil or press a silhouette design over the completed background.
Ink-Blending FAQ
Why does my ink blending look patchy?
The ink pad may be dry, the cardstock may be absorbing the ink quickly or too much pressure may be applied. Reink the pad and build the color gradually with light circular motions.
How can I prevent circular brush marks?
Begin blending off the edge of the panel, then move gradually onto the cardstock. If you must begin in the center, remove excess ink on scrap paper first.
Which cardstock is best for beginner ink blending?
Smooth white cardstock is often the easiest place to start. Neenah Solar White and Hammermill Smooth cardstock are popular options, but BetterPress and Distress Watercolor cardstock can also produce beautiful results.
Should ink-blending brushes be washed after every use?
No. Many crafters assign brushes to color families and remove excess ink with a cloth. If brushes are washed with mild soap and water, allow them to dry completely before using them again.
How do I keep blended colors from turning muddy?
Choose neighboring colors that mix cleanly and keep separate brushes for different color families. Avoid using an applicator with residual complementary ink unless you want a muted brown or gray transition.
More Ink-Blending Ideas from Spellbinders
- Create an Impactful Ink-Blended and Embossed Card Background
- Learn How to Enhance Cardstock Die Cuts with Ink Blending
- Make an Easy Hello Friend Card with Layered Dies and Ink Blending
- Learn How to Use Layering Stencils Step by Step
- Add Dimension to Die-Cut Flowers with Ink Blending
Build Confidence with Ink Blending
Ink blending is a core card-making technique, and like most creative skills, it becomes easier with practice. Begin with the cardstock, inks and applicators you already own, use a light hand and build the color gradually. As you experiment, you will discover which combinations and applicators feel most comfortable.
In the next beginner-series post, we will explore creative ways to use dies beyond basic die cutting. In the meantime, grab your inks, cardstock and brushes and have fun blending!
About the Designer
Lisa Tilson is the card maker behind My Card Trip. She creates detailed handmade cards featuring ink blending, die cutting, BetterPress, hot foiling, florals and dimensional techniques.

4 comments
Even for veteran card makers, it’s nice to be reminded of the process. Having all the tips and possibilities in one article is also helpful.
Looking forward to the die cutting blog.😊
Thank you, that’s very helpful
Even for veteran card makers, it’s nice to be reminded of the process. Having all the tips and possibilities in one article is also helpful.
Looking forward to the die cutting blog.😊
Thank you, that’s very helpful