Create a hot-foiled Christmas card with a gold greeting, colorful paper stripes, and a layered arch frame. This photo tutorial takes you through foiling the sentiment, cutting the arch layers, arranging a pink-to-red-to-green background, and finishing with a two-tone bow and clear crystals.
If you want to combine hot foiling with die-cutting, this project shows how the techniques work together in one A2 card. The striped background also leaves you with extra die-cuts for additional cards, making the design useful when planning several holiday greetings.
Hi, crafty friends! Lea Lawson here. I’m using the Upright Italic Joy to the World Press + Foil Plate by Paul Antonio for the greeting. I love how the calligraphy pairs with the bright stripes and glittered frame!
Project Snapshot
| Project Type | Handmade Christmas card |
|---|---|
| Techniques | Hot foiling, die-cutting, paper strip backgrounds, and dimensional layering |
| Occasion | Christmas |
| Finished Size | A2: 4¼″ × 5½″ |
| Color Palette | Pink, red, green, white, and gold |
| Featured Product | Upright Italic Joy to the World Press + Foil Plate by Paul Antonio |
What You’ll Need
Spellbinders Supplies
- Upright Italic Joy to the World Press + Foil Plate by Paul Antonio - BP-369
- Essential Arches Etched Dies - S5-526
- Color Block Accent Arches Etched Dies - S5-743
- Stripe Right Etched Dies - S4-1450
- Bow & Bell Scallop Frame Etched Dies by Lisa Horton - S4-1448
- Original Glimmer Hot Foil System - GLS-005
- Platinum SIX Die Cutting & Embossing Machine - PE-104
- Glimmer Hot Foil Roll - Polished Brass - GLF-024
- Classic White ColorWheel Cardstock - CS-8-148
- Blush ColorWheel Cardstock - CS-8-103
- Dahlia ColorWheel Cardstock - CS-8-105; confirm against the original supply list
- Poppy ColorWheel Cardstock - CS-8-100
- Pomegranate ColorWheel Cardstock - CS-8-101
- Cranberry ColorWheel Cardstock - CS-8-102
- Peridot ColorWheel Cardstock - CS-8-118
- Rainforest ColorWheel Cardstock - CS-8-119
- Fern ColorWheel Cardstock - CS-8-120
- Gold glitter cardstock from Gold Assortment Treasured Cardstock - SCSP-001
- Silver Mix Color Essentials Gems, using the clear crystals - SCS-130
- Handy Craft Tool Set - T-098
Other Supplies
- Liquid glue
- Foam tape
- Cardstock shim, if appropriate for your foiling setup
- Tools for trimming strips and preparing an A2 card base
How to Make the Hot-Foiled Christmas Card
Prepare the foiled arch first, then build the striped background and add the finishing details. Keep the extra paper strips for additional holiday cards.
Step 1 - Heat the Foiling Platform and Sentiment Plate
Turn on the Original Glimmer Hot Foil System and allow it to heat. When the green ready light appears, place the Joy to the World plate on the platform and press the timer button.
When the timer stops flashing, prepare the white cardstock and Polished Brass hot foil.
Step 2 - Foil the Greeting onto White Cardstock
Remove the platform from its base. Place the foil over the heated plate with its shiny colored side facing down toward the plate, then place white cardstock on top. Add the foiling plates in the order recommended for your system.
Run the prepared platform through the Platinum SIX.
Lea’s Tip: I like adding a cardstock shim within my Glimmer sandwich when foiling press plates. This is a preference for my setup; check your system’s instructions and test the combination that works with your machine.
After the pass through the machine, gently peel away the foil carrier to reveal the greeting.
Step 3 - Cut the White Arch Frame and Sentiment Panel
Cut around the foiled greeting with Arch #4 from the Essential Arches Etched Dies.
Cut around the greeting again with the smaller Arch #6 from the same set. This second cut separates the smaller sentiment arch from the larger white frame. Keep both pieces for assembly.
Step 4 - Make the Gold Glitter Accent Frame
Cut the second die from the Color Block Accent Arches Etched Dies using gold glitter cardstock.
Adhere the glitter accent to the larger white arch frame.
Step 5 - Raise the Sentiment Arch
Add foam tape to the back of the smaller foiled sentiment arch. Adhere it in the center of the larger frame.
Step 6 - Die-Cut the Colored Strips
Use the Stripe Right Etched Dies to cut strips from the following cardstock colors:
Step 7 - Assemble the Striped Background
Gather the strips for this card and adhere them across the lower portion of a white A2 card base. Arrange the colors in a gradient, moving through pinks, reds, and then greens.
Lea’s Tip: You’ll have plenty of strips left over. Keep them for additional holiday cards and try changing the greeting for each one.
Trim the overhanging strips flush with both sides of the card base.
Step 8 - Attach the Arch and Assemble the Bow
Adhere the completed sentiment arch to the card front with liquid glue.
Cut the bow pieces from the Bow & Bell Scallop Frame Etched Dies using Poppy and Pomegranate cardstock. Assemble the bow.
Step 9 - Add the Finishing Crystals
Attach the bow to the upper-right corner of the sentiment arch. Finish with clear self-adhesive crystals from the Silver Mix Color Essentials Gems.
Tips for the Best Results
- Foil before cutting the arch. This lets you position the arch die around the finished greeting.
- Keep both white arch pieces. The larger frame supports the glitter accent, while the smaller piece holds the foiled sentiment.
- Treat shimming as setup-specific. Lea uses a cardstock shim in her foiling sandwich; test against your system’s recommended setup.
- Trim the stripes after adhering them. The strips can extend beyond the base while you arrange them, then be trimmed to the card edges.
- Save the extra strips. Cutting several colors produces pieces for more than one holiday card.
Ways to Customize This Project
Use the same striped layout with another holiday greeting, or try a different group of cardstock colors. Changing the foil and glitter accent together offers another way to vary the finish.
For a batch of cards, prepare several striped bases from the leftover die-cuts, then add different sentiments. You could also explore a simpler version without the bow or crystals. These are suggested variations; the photographed card uses the complete layered arch, two-tone bow, and clear crystal accents.
Frequently Asked Questions
Can a press plate be used for hot foiling?
The plate used here is specifically named a Press + Foil Plate and is used for hot foiling in this project. Lea combines it with the Original Glimmer Hot Foil System and Polished Brass hot foil. Check the compatibility information for your particular plate and system before using another product in the same way.
Which side of the hot foil faces the plate?
In this setup, the shiny colored side faces down toward the heated plate, and the white cardstock sits above the foil. Lea describes this as placing the “pretty side down.” Add the foiling plates in the recommended order, then pass the prepared platform through the compatible die-cutting machine.
Do I need a cardstock shim for hot foiling?
Lea uses a cardstock shim when foiling press plates in her setup. That is her personal adjustment rather than a requirement for every combination of machine, plate, foil, and cardstock. Begin with your system’s instructions, then test any recommended adjustment before preparing all the sentiment panels for a batch of cards.
How can I use leftover cardstock strips for more Christmas cards?
Repeat the striped background on additional card bases, then change the greeting or color order. This project cuts strips from several cardstock colors, leaving extras after the first card. Lea suggests using those pieces for more holiday cards and featuring different sentiments while keeping the same basic layout.
More Christmas Card and Foiling Ideas from Spellbinders
- Build your technique knowledge with Hot Foil Stamping for Beginners.
- Try another seasonal design in this layered snowflake Christmas card tutorial with hot-foiled sentiments.
- Explore another use for paper strips with a striped birthday card made with Stripe Right Etched Dies.
This Christmas card combines a foiled greeting with a colorful striped background and a dimensional arch frame. Once you’ve prepared the first set of die-cuts, use the extra strips to build more holiday cards with different greetings. I hope you enjoyed seeing the design come together and feel inspired to explore your own combination of stripes, foil, and festive details!
