A Christmas Dance
on August 15, 2024

3 Interactive Christmas Cards with Dancin’ Dies

Add playful movement to your holiday card making with three Christmas card ideas featuring characters from the Dancin’ Christmas Friends Collection. In this tutorial, you’ll learn how to assemble a dancing gnome, a whimsical Christmas tree and a festive nutcracker using layered die cutting. You’ll also discover a simple foam-square technique that allows the characters’ legs to swing from side to side. Complete the cards with 3D embossed backgrounds, hot-foiled sentiments and sparkling embellishments. Two mini slimline designs provide room for the taller characters, while an A2 card showcases the smaller Dancin’ Douglas Christmas tree.

Hello there, Michelle Short here, and I am delighted to be back on the Spellbinders blog today. I’m sharing three projects using the Dancin’ Christmas Friends Collection. This fabulous collection features characters whose legs can move—or dance—which is so much fun!

Project Snapshot

Skill Level Beginner
Approximate Time 45 Minutes per Card
Project Type Set of three interactive Christmas cards
Techniques Layered die cutting, interactive die cutting, 3D embossing, press-plate debossing and hot foiling
Occasion Christmas and winter holidays
Finished Size Two mini slimline cards and one A2 card measuring 4.25 x 5.5 inches; mini slimline card-base dimensions were not specified
Featured Products Dancin’ Gnome, Dancin’ Douglas and Dancin’ Nutcracker Fitz Etched Dies

What You’ll Need

Spellbinders Products

Spellbinders Supplies:

Other Supplies

  • White cardstock
  • Tape runner adhesive
  • Anti-static powder tool
  • Christmas Red Stickles

Card 1: Dancin’ Gnome Gift Card

Interactive Christmas card featuring a die-cut dancing gnome holding a gift

For my first card, I used the Dancin’ Gnome Etched Dies. The assembled gnome is almost 6 inches tall, so I chose a mini slimline card to leave enough room for his dancing legs.

Die Cut and Assemble the Gnome

  • Die cut the gnome from Snowdrift, Barely Peach, Teal Topaz, Waterfall and Poppy Field Color Essentials Cardstock, along with Silver Assortment Treasured Cardstock.
  • Assemble the body, arms, present and other decorative layers.
  • Keep the legs separate so they can be added as the interactive element.

Layered die-cut Christmas gnome pieces prepared for an interactive card

Create the Snowflake Background

  • Cut a cardstock panel to 3.5 x 6.5 inches with the Guillotine Paper Trimmer.
  • Place the panel inside the Flurry of Snowflakes 3D Embossing Folder and run it through the Platinum Six.
  • Adhere the embossed panel to a mini slimline card base with tape runner adhesive.

Add the Moving Legs

  • Position the gnome’s legs in relation to his body.
  • Temporarily secure the legs to the front of the body with Best Ever Craft Tape.

Foam-square placement behind a die-cut gnome for moving legs

  • Turn the gnome over and add foam squares behind the body.
  • Place one foam square inside the circular opening at the top of the legs. Do not attach adhesive directly to the legs.
  • Remove the backing from the foam squares and adhere the gnome to the card.
  • Remove the temporary craft tape from the front. The legs should now move from side to side.

Designer Tip: Add a little anti-static powder around the sides of the foam square. This reduces residual stickiness that could catch the legs and restrict their movement.

Foil and Add the Sentiment

  • Hot foil a sentiment from the Mistletoe Greetings Press Plate & Die Set onto white cardstock using Silver Glimmer Hot Foil.
  • Cut it with the coordinating die, then use scissors to create ribbon ends on both sides.
  • Add a foam square behind each end of the sentiment, leaving the center unsupported so the gnome’s legs can continue to move.
  • Finish the card with a Silver Mix Color Essentials Gem in the center of the bow.

Card 2: Dancin’ Douglas Christmas Tree Card

Interactive A2 Christmas card featuring the Dancin’ Douglas tree

For my second project, I used the Dancin’ Douglas Etched Dies. Douglas is shorter than the gnome, so he fits nicely on an A2 card measuring 4.25 x 5.5 inches.

Die Cut and Assemble Douglas

  • Die cut the pieces from Peridot, Rainforest, Timber, Poppy Field, Snowdrift and Onyx Color Essentials Cardstock, along with Gold Assortment Treasured Cardstock.
  • Adhere the layered pieces together, keeping the legs separate for now.

Layered Dancin’ Douglas Christmas tree die cut before card assembly

Deboss the Candy Cane Background

  • Emboss or deboss the Candy Cane Stripes Press Plate into a white cardstock panel.
  • Adhere the finished panel to an A2 white card base with tape runner adhesive.

Designer Tip: When embossing or debossing press plates with the Platinum Six, use this sandwich: Platform Base, Platform Top, Embossing Mat, cardstock, press plate facing down and Adapter Plate D.

Make the Tree Interactive

  • Position the legs beneath the tree body and temporarily secure them at the front with Best Ever Craft Tape.
  • Turn the tree over and add foam squares behind the body.

Foam-square placement for interactive Dancin’ Douglas moving legs

  • Place a foam square inside the circular opening at the top of the legs without adding adhesive directly to the legs.
  • Remove the foam-square backings and adhere the tree to the card.
  • Remove the temporary craft tape so the legs can swing from side to side.
  • Hot foil a Mistletoe Greetings sentiment onto white cardstock using Champagne Glimmer Hot Foil.
  • Cut the sentiment with its coordinating die and attach it with foam squares placed at either end.
  • Finish the ornaments with Christmas Red Stickles.

Card 3: Dancin’ Nutcracker Christmas Card

Mini slimline Christmas card featuring a layered die-cut nutcracker

For my final project, I used the Dancin’ Nutcracker Fitz Etched Dies. The assembled nutcracker is almost 6 inches tall, so I again selected a mini slimline format. For this version, I secured his legs rather than making them move, demonstrating that the dies can also be used for a traditional layered character.

Die Cut and Assemble the Nutcracker

  • Die cut the pieces from Snowdrift, Alabaster, Barely Peach, Onyx and Poppy Field Color Essentials Cardstock, along with Gold Assortment Treasured Cardstock.
  • Layer and adhere all the die-cut pieces, including the legs.

Assembled layered nutcracker die cut in red, white, black and gold

Emboss the Gift-Wrap Background

  • Cut a cardstock panel to 3.5 x 6.5 inches.
  • Place the panel inside the All Wrapped Up 3D Embossing Folder and run it through the Platinum Six.
  • Adhere the embossed panel to a mini slimline card base.

Die-cut nutcracker arranged on a 3D embossed mini slimline card

Complete the Card

  • Attach the nutcracker to the card with foam squares, securing the legs to the body.
  • Add a sentiment from the Mistletoe Greetings Press Plate & Die Set, hot foiled with Champagne Glimmer Hot Foil.
  • Finish the design with Gold Mix Color Essentials Gems.

Tips for the Best Results

  • Assemble the character’s body before positioning the legs so you can check the final proportions.
  • Keep all adhesive away from the moving portions of the legs.
  • Use temporary craft tape to hold the legs in position while adding the foam square behind the character.
  • Apply anti-static powder around exposed adhesive edges if the legs catch or stick.
  • Place dimensional adhesive only at the ends of a sentiment strip when it crosses in front of moving legs.
  • Use mini slimline card bases for characters that are too tall for a standard A2 card.

Ways to Customize These Christmas Cards

  • Change the cardstock palette to coordinate with your holiday decorations or the recipient’s favorite colors.
  • Use metallic or glitter cardstock for ornaments, presents, hats and small character details.
  • Attach the legs permanently when you want a traditional layered die-cut design instead of an interactive card.
  • Replace the hot-foiled sentiments with stamped, letterpressed or die-cut greetings.
  • Add snowy ink splatters, sequins or gems to create more sparkle around the characters.
  • Adapt the characters for gift tags or holiday decor by changing the project format.

Interactive Christmas Card FAQ

How do the legs move on a Dancin’ die-cut character?

A foam square is placed through the circular opening at the top of the legs and adhered to the card behind the character’s body. The legs remain free of adhesive, allowing them to swing around the foam square.

How can I stop the moving legs from sticking?

Apply a small amount of anti-static powder around the exposed sides of the foam square. Keep liquid adhesive, tape and other sticky surfaces away from the legs.

Can I make a Dancin’ character without interactive legs?

Yes. Adhere the legs directly to the body or card panel, as shown on the nutcracker card. This creates a stationary layered character.

What card size works best for tall Dancin’ characters?

The gnome and nutcracker in this tutorial are almost 6 inches tall, so mini slimline cards provide more vertical space. The shorter Dancin’ Douglas tree fits on a standard A2 card.

Can press plates be used without BetterPress ink?

In this project, the Candy Cane Stripes Press Plate was used to create an uninked embossed or debossed background. Michelle used a Platinum Six sandwich with an embossing mat and Adapter Plate D.

More Interactive Card Ideas from Spellbinders

Create Playful Movement on Your Christmas Cards

Interactive die-cut characters add an unexpected and joyful detail to handmade Christmas cards. By positioning the legs around a single foam square and keeping the moving pieces free of adhesive, you can create simple side-to-side movement without complicated mechanisms. Combine the dancing characters with embossed backgrounds, metallic cardstock and hot-foiled sentiments for festive cards that are as much fun to play with as they are to display.

About the Designer

Michelle Short is a card maker and the creator behind The Card Grotto. In this tutorial, she shares techniques for layered die cutting, interactive card construction, embossing and hot foiling.

Leave a comment

Your email will not be published. Please note, comments need to be approved before they are published.

2 comments

Susie Coulthard,

How do you make the Dancing & the Dancing Douglas – “DANCE” ?
How do they "swing " ?

Rw,

Why are there two different lengths of arms?!


  • How to Layer Nesting Circle Dies for Beautiful Christmas Cards, S4-114, S4-293, S4-124, S4-1453, S6-259, BP-312

    BP-312

    How to Layer Nesting Circle Dies for Beautiful Christmas Cards

    Nesting dies are among the most versatile tools in any cardmaker's collection, but combining multiple nesting die sets can create even more intricate and eye-catching designs. In this step-by-step Christmas card tutorial, you'll learn how to layer three different circle die sets to create a detailed focal point, then enhance it with festive stripes, winter foliage, a die-cut bird, and a foiled holiday sentiment. This...

  • Creative Ways to Use Basic Shape Dies for Cardmaking, S4-246, S4-110, S4-904, S4-124, S4-139, S4-114, S4-511, S4-477, S4-293, S5-738, S5-785, STP-300, S4-1452, BP-377, S4-1280

    BP-377

    Creative Ways to Use Basic Shape Dies for Cardmaking

    Basic shape dies are among the most versatile tools in any craft room. While they're often used for simple layering, they can do much more. In this tutorial, you'll learn several creative ways to use circles, rectangles, labels, and ovals to create custom frames, shaped cards, dimensional focal points, and layered backgrounds. These techniques are perfect for cardmakers who want to get more value from...

  • How to Make an Interactive Snowboard Card with a Sliding Character, S5-786, STN-139, S5-785, STP-300, S4-1503, S5-748

    S4-1503

    How to Make an Interactive Snowboard Card with a Sliding Character

    Create a playful interactive winter card featuring a snowboarding fox that slides across a snowy landscape and spins as it moves. In this step-by-step tutorial, you'll learn how to build a layered stenciled background, assemble an adorable winter fox, create a snowboard scene, and incorporate an easy interactive mechanism using Pear Blossom Press Snap 'n Slide discs. This project is perfect for cardmakers who want...