Posted by Spellbinders Team
on September 17, 2017
Can I tell you something about me? I hate the Christmas rush. I hate it so much I refuse to get caught up in it. But I am fanatic about a joy-filled, meaningful celebration, so I start early! Making and wrapping my gifts a tiny bit at a time. Using two of my etched dies sets, here's my latest gift box. It's easy as can be, if you take your time and enjoy each step.
So this is what I gathered for the project:
Trace a circle around the lid as a guide on a pretty piece of paper. Note to cut the piece a bit larger than your penciled outline. Then clip out little wedges on its edges as shown so it will fit well, and glue down.
Make sure to add a strip of paper around the edge of the lid to hide any messy glue that may have seeped out (because we are not perfectionists here!)
Don't panic when things don't go perfectly. Remember, this isn't a contest and you are a creative crafter, right? Just take a piece of scrap and cut out an extra bit to fill in, you clever thing, you! And trim off the wonky part on the bottom, while you're at it.
Let's decorate it a little more. Use your glitter, sequins, ribbon, inks, or whatever. Put on some music and dance!
Pieces of vellum were placed behind my windows so a battery operated votive light can be tucked inside. I added a straw chimney and smoke was made from a piece of pipe cleaner.
Assemble your house and then attach to the lid of your round box.
Finally, tuck in a piece of tissue paper with a little home made gift inside. Christmas is going to be full of magic. You're going to be ready early so you can enjoy every moment, stress free!
- S4-821 Building a Snowman Etched Dies
- S4-753 Build a House Etched Dies
- Empty cheese box
- Piece of heavy paper to make the box a bit taller (I use cheap tag board)
- Scrap papers and vellum
- My favorite glitters, pens and inks
- Stray ribbons and bits of paper straws...anything that inspires me :)
Reconstructing the box.
Let's make our little box taller by adding a strip of tag board. Use whatever size will make your decorations fit.
Trace a circle around the lid as a guide on a pretty piece of paper. Note to cut the piece a bit larger than your penciled outline. Then clip out little wedges on its edges as shown so it will fit well, and glue down.
Make sure to add a strip of paper around the edge of the lid to hide any messy glue that may have seeped out (because we are not perfectionists here!)
Embellishing the box.
Now you're ready to add the decorative elements. Use your favorite adhesive to stick the Building a Snowman Etched Dies die cuts to the base of your box.
Don't panic when things don't go perfectly. Remember, this isn't a contest and you are a creative crafter, right? Just take a piece of scrap and cut out an extra bit to fill in, you clever thing, you! And trim off the wonky part on the bottom, while you're at it.
Let's decorate it a little more. Use your glitter, sequins, ribbon, inks, or whatever. Put on some music and dance!
Building the top.
Get out the Build a House Etched Dies, cut it out and decorate as you like. Mine was made like a gingerbread house. For the icing details, I drew with a Uni-Ball Signo pen - its dense opaque white ink never fails.
Pieces of vellum were placed behind my windows so a battery operated votive light can be tucked inside. I added a straw chimney and smoke was made from a piece of pipe cleaner.
Assemble your house and then attach to the lid of your round box.
Finally, tuck in a piece of tissue paper with a little home made gift inside. Christmas is going to be full of magic. You're going to be ready early so you can enjoy every moment, stress free!
